Servicing

Divers Warehouse Ltd provides all round servicing, by staff trained to IDEST, Manufacturer, HSE and SITA standards. Please ask to see our certifications.

Always remember that a regulator is life support equipment and must be maintained to perform as such. Servicing by trained personnel is recommended by all regulator manufacturers. If your equipment is subject to heavy, or prolonged regular use, then an intermediate or active service is also recommended to maintain a peak working condition.

Divers Warehouse Ltd Technicians use recommended service kits supplied by manufacturers. A full strip down and rebuild of equipment replacing both active and static parts as recommended by the manufacturer. Removal of salt and oxidation in an ultrasonic bath.
Every active and static part is inspected, but only replaced if outside the manufacturers specifications.

From the date of manufacture cylinders require a Visual test after 2.5 years. Tested cylinders are stamped and stickered with the appropriate date (check your date now!). From this date the cylinders require a hydro-static test after a further 2.5 years; this process is ongoing in a 2.5 year cycle.

Servicing to a limited degree can be carried out on computers; i.e. battery replacement. However, due to the complexity of hardware and software units may need to be returned to the manufacturers.

Labour Charges:
1st Stage £15.00 plus parts
2nd Stage £12.50 plus parts
1st and 2nd Stage £27.50 plus parts
1st and two 2nd Stages (Full Set) £37.50 plus parts

Parts List:

Apeks Service Kits
1st Stage Kit £15.05
2nd Stage Service Kit £6.30
Conversion
Flight 2nd Stage Kit £7.25
Flight DIN or A-Clamp Assey £50.00
DIN Conversion £34.00
Aqualung Service Kits
1st Stages £20.00
2nd Stages £8.50
Mikron 2nd Stage  £20.85
Conversion
Legend/Glacia DIN ACD £45.00
Legend/Glacia DIN NON-ACD £50.00
Cressi Service Kits
1st Stages £7.00
2nd Stages £6.00
Poseidon Service Kits
1st Stages £22.00
2nd Stages £12.00
Mares Service Kits
1st Stages £9.00
2nd Stages £8.50
Sherwood Service Kits
1st Stages £28.00
2nd Stages £15.00

Cylinder Testing

From the date of manufacture cylinders require a Visual test after 2.5 years. Tested cylinders are stamped with the appropriate date (check your date now!).

From this date the cylinders require a hydro-static test after a further 2.5 years; this process is ongoing in a 2.5 year cycle.
Cylinders of a size less than 1 litre do not require a test, but care and maintenance is required at the owners discretion (remember that these also fill to 232 bar!).

Air Gun cylinders with a gun valve (inc gauge) have a 5 year test date. A hydrostatic test is due after this period of time.

Cylinder Hydro Static Test + Parts + Valve Service  £39.00
Cylinder Visual Test + Parts + Pillar Valve Service  £33.00
Cylinder Twin Hydro Test + Parts inc Assembly  £84.00
Cylinder Twin Visual Test + Parts inc Assembly  £72.00
Cylinder International Shot Blast (each Cylinder)  £16.50
Cylinder 232Bar DIN/CON Aqua Pillar Valve Fitted  £42.00
Cylinder 300Bar DIN/CON Aqua Pillar Valve Fitted  £42.00
Cylinder Pillar Valve Service + Parts  £14.50
Cylinder Valve O2 Conversion Kit  £24.00
Cylinders Twins O2 Cleaned used + Parts  £60.00
Cylinders Single new inc Parts  £12.00
Cylinders Single Used + Parts + O2 Service  £24.00
Cylinders Twins new inc Parts  £48.00

BCD Servicing

BCD Auto-Air Service + Parts  £18.00
BCD check Cylinder + Service Pillar Valve  £24.00
BCD Pillar Valve Service + Parts  £14.50
BCD Pressure Test Service Direct Feed  £30.00

Computer Repairs

Servicing to a limited degree can be carried out on computers; i.e. battery replacement, pressure test. However, due to the complexity of hardware and software some units may need to be returned to the manufacturers.