|
Harness
At the heart of any good load carrying system must be a well designed harness. It should be strong, durable, simple but at the same time should be comfortable, flexible and easily adjustable. The Bravo's harness meets all these requirements. The harness crosses over behind the neck to maximise security of fitment and minimise “cylinder roll”, providing optimum balance and control. If preferred, the harness can be threaded so it is uncrossed and just fits over the both shoulders.
The Harness features
Shoulder covers: These neoprene coverings have one main function and an added bonus. Their main function is to provide additional stowage space for small items such as back up torches, line arrows etc. The bonus function is that they provide additional comfort.
Shoulder clips: The shoulder clip configuration is designed to allow full adjustability for both shoulders. You can thread the harness and have a one-side-only break point. If preferred you can thread the break point to lock or unlock on whichever shoulder, givingen full flexibility.
D-Rings: The harnesses are equipped with six D-rings.
Bump/Accessories Bag: The bump bag is made from a strong cordura material which gives excellent durability even after numerous sea water immersions. It has two pockets, one at the front and one at the rear. These allow stowage space for items such as compass, slate, spare bolt snap, drop spool etc. It is fastened to the jacket with two reinforced webbing loops which thread on to the 2" webbing waist strap.
Belt Buckle: Made from solid marine grade 316 stainless steel. A secure and positive action ensures a long life and reliable use.
Neoprene Stowage: This handy storage area is a tube of neoprene placed over the waist belt. It is ideal for storing backup instrumentation and other small items.
Crotch Strap: The crotch strap is made from one inch wide webbing preventing the rig slipping down towards the divers head if inverted and includes a scooter attachment ring.
Backplates
The backplate is available in two sizes, standard and extended. The extended size is designed for heights of 6' 3" (190 cm) and above. Available as standard in marine grade stainless steel (2.1 Kg/4.6 lbs) or to order in aluminium (0.8 Kg/1.8 lbs); plates are 3mm thick.
Backplate features:
Harness Slots: 2" webbing slots for threading of harness.
Stowage Eyelets: Ideal mounting points for torch batteries and argon bottles. Large diameter for easy removal and attachment.
Twin-Set Mounting Holes: Holes for the mounting of twin-sets with tank bands. Industry standard 11" separation holes to match standard banded and bolted twin-sets.
Cam Band Slots: A variety of slots for 2" webbing cam bands to mount almost any configuration in any manner. Ideal for the travelling diver.
Crotch Strap Mounting Slot: Mounting point for a crotch strap, which helps keep the wing secure in the event of the diver being in an inverted position.
SYSTEM FEATURES
* Sealed dual compartmental system.
* Hose routing slots.
* Slimline neck. Ideal fit for most rebreathers.
* 43lbs buoyancy capability per compartment.
* One size, fully adjustable harness.
* Single or twin systems available.
* Six integral D-Rings for accessory stowage.
* Pull down remote exhaust valve.
* Low profile wing system.
* Elasticated and cordless side panel for controlled,
even deflation.
* Stainless steel or Aluminium back plate, multi-holed
to allow any configuration.
* Harness fully adjustable from both shoulders.
* Webbing slots for single / twin tank mounting.
* Back plate height adjustment holes.
* Upgradeable single to twin system.
* Crutch strap and scooter ring.
* One or two shoulder break points.
* Complete systems are supplied dressed with inflator
hose wrap, harness shoulder pads, comfort pad,
accessory pouch crutch strap and scooter ring
Click here for the PDF data sheet
|
