|
The XTX40 regulator incorporates a new two-shot high strength composite front cover, improving the durability of the most vulnerable part of the demand valve.
The new ergonomic Venturi lever of the XTX40 has been designed to reduce the amount of grit ingress.
A new swivel hose connection is available at an extra cost. This allows the demand valve end of the hose connection to rotate and pivot, providing a more comfortable fit.
A new silicone exhaust valve has been used on the XTX40 regulator improving breathing performance.
| Specifications |
|
First Stage
- Swivel turret body
- 4 medium pressure ports, 4 x 3/8" UNF
- 2 high pressure ports, 2 x 7/16" UNF
- Environmentally dry sealed system
- Polished chrome finish
- Balanced for superior performance
|
Second Stage
- Integrated venturi control
- Pneumatically balanced valve design
- Suitable for cold water use
- Bright Chrome Finish
- Right or Left hand hose configuration
- Two shot plastic front cover
- Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (only one set supplied)
- New Optional Extra Hose Swivel connection
- Nitrox and Octopus versions available
|
| XTX40 Octopus |
Egress Octopus |
 |
 |
| A Choice of Octopus' can be added to your main regulator |
Accompanied by a 3 Gauge Console - Depth/Pressure/Compass and Otter Regulator Bag |
As they leave the factory standard Apeks regulators are suitable for use with oxygen enriched gases providing the oxygen content does NOT EXCEED 40%*. For mixtures containing more than 40% we offer a range of regulators suitable for use with Nitrox and Oxygen (also known as oxygen enriched air or EAN - Enriched Air Nitrox). Our comprehensive range, for all you dive requirements comprises the DS4 first stage and the XTX200, XTX100, XTX50, XTX40 regulators. This equipment has been specially cleaned and assembled in our purpose built class 'J' (10,000) Clean Room using oxygen safe components and lubricants and are suitable for 100% oxygen use. All first stages are available in yoke ('A') clamp or DIN fitting.
* Nitrox equipment will be supplied in Europe in accordance with the EN 144-3 and the EN13949 which states that equipment sold in CEE (European Community) countries over 21% and up to 100% will be manufactured with the special M26 fitting.
|
