Apeks XTX50 Nitrox Regulator
The XTX50 regulator incorporates a new two-shot high  strength plastic front cover, improving the durability of the most vulnerable part of the demand valve. The new ergonomic Venturi lever of the XTX50 has been designed to reduce the amount of grit ingress.  A new swivel hose connection is available at an extra cost. This allows the demand valve end of the hose connection to rotate and pivot, providing a more comfortable fit. A new silicone exhaust valve has been used on the XTX50 regulator improving breathing performance. Specifications First Stage • Swivel turret body • 4 medium pressure ports, 4 x 3/8" UNF • 2 high pressure ports, 2 x 7/16" UNF • Environmentally dry sealed system • Polished chrome finish Balanced for superior performance Second Stage • Adjustable cracking control • Integrated venturi control • Pneumatically balanced valve design • Micro Adjuster • Suitable for cold water use • Bright Chrome Finish Right or Left hand hose configuration • Two shot plastic front cover • Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied) 

For mixtures containing more than 40% we offer a range of regulators suitable for use with Nitrox and Oxygen (also known as oxygen enriched air or EAN - Enriched Air Nitrox). Our comprehensive range, for all you dive requirements comprises the DS4 first stage and the XTX200, XTX100, XTX50, XTX40 regulators. This equipment has been specially cleaned and assembled in our purpose built class 'J' (10,000) Clean Room using oxygen safe components and lubricants and are suitable for 100% oxygen use. All first stages are available in yoke ('A') clamp or DIN fitting. .

ALL NEW NITROX REGULATORS HAVE TO BE FITTED WITH THE M26 DIN THREAD. BECAUSE OF THE NEW EUROPEAN DIRECTIVE. THIS WILL NOT FIT STANDARD 5/8 PILLAR VALVES/MANIFOLDS THE TYPE WE HAVE BEEN USING FOR YEARS. IF YOU HAVE NOT GOT AN M26 PILLAR VALVE/MANIFOLD YOU CAN GET AROUND THIS BY BUYING A SPECIAL ADAPTOR TO GO BETWEEN THE M26 REGULATOR AND THE 5/8 PILLAR VALVE/MANIFOLD.